Work Safely Test 5030 (Windsor)

1. A worker shall wear such protective clothing and use such personal protective equipment or devices as are necessary to protect the worker against the hazards to which the worker may be exposed.

2. Hard hats do not provide protection from all hazards. When possible, hazards should be eliminated and hazardous areas should be avoided.

3. It is ok to drill holes in hard hats for ventilation if needed.

4. The actual protection provided by hearing protectors is usually more than the measured value (NRR)

5. No one glove protects against all chemicals. The proper type of gloves and clothing need to be selected for protection from specific chemicals.

6. Experienced safety professionals or occupational hygienists who are familiar with the actual work place environment are the staff who should select the proper respirator for the workplace environment.

7. Fall protection equipment should be inspected daily before use.

8. Fall protection must only be used if there is a danger of falling 6 metres or more.

9. One of the best ways to increase the knowledge of hazards in the workplace is to conduct a job hazards analysis on the individual tasks performed by workers.

10. Good Housekeeping is important for maintaining a safe workplace.

11. Berms should be placed between the machine and waters edge if you are working around water. This will prevent the machine from rolling into the water.

12. When operating conveyors, the guards do not have to be in place if it is during daylight hours.

13. All conveyors are required to have pull cord shut downs at accessible locations. You need to know where they are and how to use them.

14. All persons who will be operating vehicles on mine or pit property need to be aware of the traffic plan.

15. Employees shall not work alone where practical in situations where a drowning hazard exists.